View FR805S_408410.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
FR801S THRU FR806S
FAST RECOVERY GLASS PASSIVATED RECTIFIER
VOLTAGE RANGE 50 to 800 Volts CURRENT 8.0 Amperes
FEATURES
* * * * * * Fast switching Low leakage Low forward voltage drop High current capability High surge capability High reliability
D2PAK
.05 (1.27 REF.)
MECHANICAL DATA
* * * * * * Case: D2PAK molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 2.2 grams Polarity: As marking
.185 (4.70) .177 (4.50) .051 (1.29) .049 (1.25)
.343 (8.70) .335 (8.50)
.624 (15.84) .576 (14.64)
.151 (3.84) .143 (3.64)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
o
.200 (5.08)
.401 (10.19) .399 (10.13)
.015 (0.381)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25 oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TC = 75oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 3) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO IFSM RJC CJ TJ, TSTG FR801S 50 35 50 FR802S 100 70 100 FR803S 200 140 200 8.0 200 3 50 -65 to + 150 FR804S 400 280 400 FR805S 600 420 600 FR806S 800 560 800 UNITS Volts Volts Volts Amps Amps
0
.065 (1.65)
.052 (1.32) .048 (1.22) .032 (0.81)
.043 (1.10)
C/ W pF
0
C
ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 8.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 25 oC Maximum Full Load Reverse Current Average, Full Cycle at TC = 100 oC Maximum Reverse Recovery Time (Note 1) NOTES : 1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts 3. Thermal Resistance Junction to Case. 4. Suffix "R" for Reverse Polarity. SYMBOL VF FR801S FR802S FR803S FR804S 1.3 10 IR 150 trr 150 250 500 uAmps nSec 2001-4 FR805S FR806S UNITS Volts uAmps
RATING AND CHARACTERISTIC CURVES ( FR801S THRU FR806S )
AVERAGE FORWARD CURRENT, (A)
FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE
PEAK FORWARD SURGE CURRENT, (A)
FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 300 250 200 150 100 50 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100
8.3ms Single Half Sine-Wave (JEDED Method)
8
6 4
Single Phase Half Wave 60Hz Inductive or Resistive Load
2
0
0
25
50 75 100 125 150 175 CASE TEMPERATURE, (oC)
INSTANTANEOUS FORWARD CURRENT, (A)
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 10 3.0 1.0 0.3 0.1 .03 .01 0.4
TJ = 25oC Pulse Width=300uS 1% Duty Cycle
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10
INSTANTANEOUS REVERSE CURRENT, (uA)
6 4 2 1.0 .6 .4 .2 .1 .06 .04 .02 .01
TJ = 25
0.6
0.8
1.0
1.2
1.4
1.6
1.8
0
20
40
60
80
100
120
140
INSTANTANEOUS FORWARD VOLTAGE, (V)
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE, (pF)
200 100 60 40 20 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, ( V )
TJ = 25oC
FIG. 6 - TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC
50 NONINDUCTIVE 10 NONINDUCTIVE
trr +0.5A (-) 0 PULSE GENERATOR (NOTE 2) 1 NONINDUCTIVE OSCILLOSCOPE (NOTE 1) (+) -1.0A 1 NOTES: Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF. 2. Rise Time = 10ns max. Source Impedance = 50 ohms. 1cm SET TIME BASE FOR 50/100 ns/cm -0.25A
(+) 25 Vdc (approx) (-)
D.U.T
RECTRON

▲Up To Search▲

Price & Availability of FR805S

	To Download FR805S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .